|
The
TeleSpy's telephone is the same popular "Slimline" telephone found
in millions of home. Operation is no different than the regularly
produced version and the user would notice no difference. The
TeleSpy plugs into any standard telephone jack for normal phone
operation.
By adding our patent-pending circuitry, the
"Slimline" manufacturer modifies the interior electronics while
leaving the exterior virtually unchanged. The TeleSpy circuitry
requires an AC adapter (provided) to be plugged into any standard
110V wall outlet. The absence of this power adapter would render the
TeleSpy circuitry useless, but would not affect the telephone's
normal operation. Because of the ordinary appearance the TeleSpy is
not obtrusive and more effective. The connection of the TeleSpy to
your existing phone line has no adverse effect. It is no different
than adding another ordinary phone.
The
Motion Sensor
The TeleSpy's motion sensor is PIR or Passive Infrared Technology.
The passive infrared sensor detects changes in the room's heat
signature due to occupant motion. The range is in excess of 30 feet
at which point the width is about 20 feet, creating about a 45
degree wedge beyond the sensor origin.
The Microphone
The hidden condenser microphone is strategically placed for
maximum efficiency. It is amplified to insure that the slightest of
sounds are heard, producing a high quality listening experience.
Frequently Asked Questions
How does the Self Test function help me?
The test switch on the TeleSpy powers the green LED light
near it. It tells the operator instantly when the motion sensor
detects something (light comes on). The light stays during a timed
period (the listening period) then the phone would disconnect (light
off), now, light is off and TeleSpy is instantly re-armed for the
next detection. Knowing how to use this function allows the operator
to discover the exact perameter and sensitivity of the motion sensor
within their personal environment. Operational tip: Unplug the phone
line. Now the TeleSpy will show LED light "on" for detection and
light "off" for disconnect and reset without calling. Always
remember that the first time you turn the TeleSpy power "on" it
takes 60 seconds to arm but the LED will turn off at 30 seconds. You
must wait 30 seconds after the light has gone off before the TeleSpy
is armed (only the first time.) Thereafter, when the light goes off,
the TeleSpy is instantly armed.
Can the TeleSpy™ be used in smaller homes and
apartments and homes with existing security systems?
The TeleSpy™ is an ideal solution for the smaller homes and
apartments. It will be desirable to lower and middle income
dwellings, including rented apartments, because they will be seeking
affordable security and higher income users find it a valuable
supplement to their existing systems. About 30% of TeleSpys™ sold
will be going into small businesses, garages or shops.
What if I hear a burglar?
First, be grateful you're not there but are listening from a
remote location. Never attempt to apprehend criminals. This could be
very dangerous! If professional assistance is required, call 911 or
your local law enforcement emergency phone number.
How do I know my best use of my TeleSpy?
Simple, think like an intruder. If an intruder entered, where
would he come from (34% come through the front door), where would he
go? What's he want? Predicting this movement should dictate the
TeleSpy's position in the room. First place TeleSpy in the best
place, lastly run the cords. Use extension cords if necessary.
What about my pets?
Pets and motion sensors can live together. If you use the
motion sensor with the pet in close proximity it probably will set
off the sensor. Use the test light on TeleSpy to discover for
yourself the sensitivity of your pet(s), then devise a strategy
which allows the TeleSpy™ to function without pet interference; you
may find that pointing it in a specific direction or slightly
raising the unit solves the problem. Sensitivity is factory set to
trigger on about a 40 pound (5 years old) child or animal.
Reg. Retail $75.95
If you wish to buy for your own
use, please visit our authorized dealer...
|